Struct tokio_process::ChildStdout [−][src]
pub struct ChildStdout { /* fields omitted */ }
The standard output stream for spawned children.
This type implements the Read
trait to read data from the stdout handle
of a child process. Note that this type is also “futures aware” meaning
that it is both (a) nonblocking and (b) will panic if used off of a
future’s task.
Trait Implementations
impl AsRawFd for ChildStdout
[src][+]
fn as_raw_fd(&self) -> RawFd
[src][−]
Extracts the raw file descriptor. Read more
impl AsyncRead for ChildStdout
[src][+]
pub unsafe fn prepare_uninitialized_buffer(&self, buf: &mut [u8]) -> bool
[src][−]
Prepares an uninitialized buffer to be safe to pass to read
. Returns
true
if the supplied buffer was zeroed out. Read more
pub fn poll_read(&mut self, buf: &mut [u8]) -> Result<Async<usize>, Error>
[src][−]
Attempt to read from the AsyncRead
into buf
. Read more
pub fn read_buf<B>(&mut self, buf: &mut B) -> Result<Async<usize>, Error> where
B: BufMut,
[src][−]
B: BufMut,
Pull some bytes from this source into the specified BufMut
, returning
how many bytes were read. Read more
pub fn framed<T>(self, codec: T) -> Framed<Self, T> where
Self: AsyncWrite,
T: Encoder + Decoder,
[src][−]
Self: AsyncWrite,
T: Encoder + Decoder,
Use tokio_codec::Decoder::framed instead
Provides a Stream
and Sink
interface for reading and writing to this
I/O object, using Decode
and Encode
to read and write the raw data. Read more
pub fn split(self) -> (ReadHalf<Self>, WriteHalf<Self>) where
Self: AsyncWrite,
[src][−]
Self: AsyncWrite,
Helper method for splitting this read/write object into two halves. Read more
impl Debug for ChildStdout
[src][+]
fn fmt(&self, f: &mut Formatter<'_>) -> Result
[src][−]
Formats the value using the given formatter. Read more
impl Read for ChildStdout
[src][+]
fn read(&mut self, bytes: &mut [u8]) -> Result<usize>
[src][−]
Pull some bytes from this source into the specified buffer, returning how many bytes were read. Read more
pub fn read_vectored(
&mut self,
bufs: &mut [IoSliceMut<'_>]
) -> Result<usize, Error>
1.36.0[src][−]
&mut self,
bufs: &mut [IoSliceMut<'_>]
) -> Result<usize, Error>
Like read
, except that it reads into a slice of buffers. Read more
pub fn is_read_vectored(&self) -> bool
[src][−]
can_vector
)Determines if this Read
er has an efficient read_vectored
implementation. Read more
pub unsafe fn initializer(&self) -> Initializer
[src][−]
read_initializer
)Determines if this Read
er can work with buffers of uninitialized
memory. Read more
pub fn read_to_end(&mut self, buf: &mut Vec<u8, Global>) -> Result<usize, Error>
1.0.0[src][−]
Read all bytes until EOF in this source, placing them into buf
. Read more
pub fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>
1.0.0[src][−]
Read all bytes until EOF in this source, appending them to buf
. Read more
pub fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>
1.6.0[src][−]
Read the exact number of bytes required to fill buf
. Read more
pub fn by_ref(&mut self) -> &mut Self
1.0.0[src][−]
Creates a “by reference” adaptor for this instance of Read
. Read more
pub fn bytes(self) -> Bytes<Self>
1.0.0[src][−]
pub fn chain<R>(self, next: R) -> Chain<Self, R> where
R: Read,
1.0.0[src][−]
R: Read,
Creates an adaptor which will chain this stream with another. Read more
pub fn take(self, limit: u64) -> Take<Self>
1.0.0[src][−]
Creates an adaptor which will read at most limit
bytes from it. Read more
Auto Trait Implementations
impl !RefUnwindSafe for ChildStdout
impl Send for ChildStdout
impl Sync for ChildStdout
impl Unpin for ChildStdout
impl !UnwindSafe for ChildStdout
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized,
[src][+]
T: 'static + ?Sized,
pub fn type_id(&self) -> TypeId
[src][−]
Gets the TypeId
of self
. Read more
impl<T> Borrow<T> for T where
T: ?Sized,
[src][+]
T: ?Sized,
pub fn borrow(&self) -> &T
[src][−]
Immutably borrows from an owned value. Read more
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src][+]
T: ?Sized,
pub fn borrow_mut(&mut self) -> &mut T
[src][−]
Mutably borrows from an owned value. Read more
impl<T> From<T> for T
[src][+]
impl<T, U> Into<U> for T where
U: From<T>,
[src][+]
U: From<T>,
impl<R> ReadBytesExt for R where
R: Read + ?Sized,
[src][+]
R: Read + ?Sized,
pub fn read_u8(&mut self) -> Result<u8, Error>
[src][−]
Reads an unsigned 8 bit integer from the underlying reader. Read more
pub fn read_i8(&mut self) -> Result<i8, Error>
[src][−]
Reads a signed 8 bit integer from the underlying reader. Read more
pub fn read_u16<T>(&mut self) -> Result<u16, Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads an unsigned 16 bit integer from the underlying reader. Read more
pub fn read_i16<T>(&mut self) -> Result<i16, Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads a signed 16 bit integer from the underlying reader. Read more
pub fn read_u24<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads an unsigned 24 bit integer from the underlying reader. Read more
pub fn read_i24<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads a signed 24 bit integer from the underlying reader. Read more
pub fn read_u32<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads an unsigned 32 bit integer from the underlying reader. Read more
pub fn read_i32<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads a signed 32 bit integer from the underlying reader. Read more
pub fn read_u48<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads an unsigned 48 bit integer from the underlying reader. Read more
pub fn read_i48<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads a signed 48 bit integer from the underlying reader. Read more
pub fn read_u64<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads an unsigned 64 bit integer from the underlying reader. Read more
pub fn read_i64<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads a signed 64 bit integer from the underlying reader. Read more
pub fn read_u128<T>(&mut self) -> Result<u128, Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads an unsigned 128 bit integer from the underlying reader. Read more
pub fn read_i128<T>(&mut self) -> Result<i128, Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads a signed 128 bit integer from the underlying reader. Read more
pub fn read_uint<T>(&mut self, nbytes: usize) -> Result<u64, Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads an unsigned n-bytes integer from the underlying reader. Read more
pub fn read_int<T>(&mut self, nbytes: usize) -> Result<i64, Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads a signed n-bytes integer from the underlying reader. Read more
pub fn read_uint128<T>(&mut self, nbytes: usize) -> Result<u128, Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads an unsigned n-bytes integer from the underlying reader.
pub fn read_int128<T>(&mut self, nbytes: usize) -> Result<i128, Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads a signed n-bytes integer from the underlying reader.
pub fn read_f32<T>(&mut self) -> Result<f32, Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads a IEEE754 single-precision (4 bytes) floating point number from the underlying reader. Read more
pub fn read_f64<T>(&mut self) -> Result<f64, Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads a IEEE754 double-precision (8 bytes) floating point number from the underlying reader. Read more
pub fn read_u16_into<T>(&mut self, dst: &mut [u16]) -> Result<(), Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads a sequence of unsigned 16 bit integers from the underlying reader. Read more
pub fn read_u32_into<T>(&mut self, dst: &mut [u32]) -> Result<(), Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads a sequence of unsigned 32 bit integers from the underlying reader. Read more
pub fn read_u64_into<T>(&mut self, dst: &mut [u64]) -> Result<(), Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads a sequence of unsigned 64 bit integers from the underlying reader. Read more
pub fn read_u128_into<T>(&mut self, dst: &mut [u128]) -> Result<(), Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads a sequence of unsigned 128 bit integers from the underlying reader. Read more
pub fn read_i8_into(&mut self, dst: &mut [i8]) -> Result<(), Error>
[src][−]
Reads a sequence of signed 8 bit integers from the underlying reader. Read more
pub fn read_i16_into<T>(&mut self, dst: &mut [i16]) -> Result<(), Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads a sequence of signed 16 bit integers from the underlying reader. Read more
pub fn read_i32_into<T>(&mut self, dst: &mut [i32]) -> Result<(), Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads a sequence of signed 32 bit integers from the underlying reader. Read more
pub fn read_i64_into<T>(&mut self, dst: &mut [i64]) -> Result<(), Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads a sequence of signed 64 bit integers from the underlying reader. Read more
pub fn read_i128_into<T>(&mut self, dst: &mut [i128]) -> Result<(), Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads a sequence of signed 128 bit integers from the underlying reader. Read more
pub fn read_f32_into<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads a sequence of IEEE754 single-precision (4 bytes) floating point numbers from the underlying reader. Read more
pub fn read_f32_into_unchecked<T>(
&mut self,
dst: &mut [f32]
) -> Result<(), Error> where
T: ByteOrder,
[src][−]
&mut self,
dst: &mut [f32]
) -> Result<(), Error> where
T: ByteOrder,
please use read_f32_into
instead
DEPRECATED. Read more
pub fn read_f64_into<T>(&mut self, dst: &mut [f64]) -> Result<(), Error> where
T: ByteOrder,
[src][−]
T: ByteOrder,
Reads a sequence of IEEE754 double-precision (8 bytes) floating point numbers from the underlying reader. Read more
pub fn read_f64_into_unchecked<T>(
&mut self,
dst: &mut [f64]
) -> Result<(), Error> where
T: ByteOrder,
[src][−]
&mut self,
dst: &mut [f64]
) -> Result<(), Error> where
T: ByteOrder,
please use read_f64_into
instead
DEPRECATED. Read more
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src][+]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src][−]
Performs the conversion.
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src][+]
U: TryFrom<T>,